Aluminium laminate.
Excellent resistance to atmospheric agents. Excellent deformation aptitude. Thermal and electrical conductivity. High corrosion resistance.
State: annealed, semi-hard and hard (ask for other states).
Format: various (see sheet specifications).
Sheets and bands for general applications | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
STANDARD: | ||||||||||||
Composition of aluminium alloys | ||||||||||||
Material designation | Composition (mass content) in % | |||||||||||
Symbol | Standard | Element | Cu | Si | Fe | Mn | Mg | Zn | Ti | Cr | Others | Al |
Al | EN-AW- 1050 | min. Max. |
-- 0,05 |
-- 0,25 |
-- 0,40 |
-- 0,05 |
-- 0,05 |
-- 0,07 |
-- 0,05 |
-- -- |
-- 0,03 |
99,5 |
Al | EN-AW- 3003 | min. Max. |
0,05 0,20 |
-- 0,60 |
-- 0,70 |
1,00 1,50 |
-- -- |
-- 0,10 |
-- +Zr 0,20 |
-- 0,10 |
-- 0,15 |
Resto |
Al | EN-AW- 5005 | min. Max. |
-- 0,05 |
-- 0,30 |
-- 0,45 |
-- 0,15 |
0,70 1,10 |
-- 0,20 |
-- -- |
-- 0,10 |
-- 0,15 |
Resto |
Al | EN-AW 5083 | min. Max. |
-- 0,10 |
-- 0,40 |
-- 0,40 |
0,40 1,00 |
4,00 4,90 |
-- 0,25 |
-- +Zr 0,20 |
0,05 0,25 | -- 0,15 |
Resto |
Al | EN-AW 5754 | min. Max. |
-- 0,10 |
-- 0,40 |
-- 0,40 |
-- 0,50 |
2,60 3,60 |
-- 0,15 |
-- 0,15 |
-- 0,30 |
-- 0,15 |
Resto |
WEIGHTS - SIZES CHART: weight kg/un. | ||||||
---|---|---|---|---|---|---|
2000x1000 | 3000x1250 | 3000x1500 | ||||
0,50 | 2,754 | 5,164 | 6,197 | |||
0,60 | 3,305 | 6,197 | 7,436 | |||
0,80 | 4,406 | 8,262 | 9,914 | |||
1,00 | 5,508 | 10,328 | 12,393 | |||
1,20 | 6,610 | 12,393 | 14,872 | |||
1,50 | 8,262 | 15,491 | 18,590 | |||
2,00 | 11,016 | 20,655 | 24,786 | |||
2,50 | 13,770 | 25,819 | 30,983 | |||
3,00 | 16,524 | 30,983 | 37,179 | |||
4,00 | 22,032 | 41,310 | 49,572 | |||
5,00 | 27,540 | 51,638 | 61,965 |
Aluminium 1050 | Mechanical properties | ||||||||||||
State | Breaking load Rm. N/nm2 | Elastic limit Rp 0.2 N/nm2 | Elongation A 5,65% | Fatigue limit N/mn2 | Brinell Hardness HB | Vickers Hardness HV | Stamping | Mechanisation | Surface shine | ||||
0 | 65-95 | 20 | 42 | 21 | 20 | Very good | Bad | Average | |||||
H14 | 100-140 | 105 | 10 | 50 | 35 | 36 | Good | Bad | Average | ||||
H24 | 100-140 | 105 | 10 | 70 | 35 | 36 | Good | Average | Average | ||||
H16 | 120-160 | 120 | 7 | 70 | 39 | Average | Average | Average | |||||
H26 | 120-160 | 120 | 7 | 39 | Average | Average | Average | ||||||
H18 | 150 | 140 | 6 | 100 | 43 | 44 | Bad | Average | Good |
Aluminium 5754: containers for liquids, chemical industries, storage tanks and pressure vessels, tanks for transporting loads, pipes for heat exchangers, shipbuilding, PVDF lacquered sheets for facades. High mechanical resistance, high corrosion resistance, specially for shipbuilding. Easy to shape and very good weldability.
Aluminium 5754 | Mechanical properties | ||||||||
State | Breaking load Rm. N/nm2 | Elastic limit Rp 0.2 N/nm2 | Elongation A 5,65% | Fatigue limit N/mn2 | Brinell Hardness HB | Vickers Hardness HV | Comportamiento marino | Stamping | Mechanisation |
0-H111 | 215 | 100 | 25 | 220 | 55 | 55 | Very good | Good | Very good |
H-22 | 245 | 185 | 15 | - | 70 | 75 | Very good | Average | Average |