Open profiles and locks
Open structural profiles used in metalwork and light construction, ideal for welding and assembly.
Request a quoteMeasurements
1000 1250 1500Technical information
TABLA PESOS-MEDIDAS | ||||||||
---|---|---|---|---|---|---|---|---|
PERFIL EN U | ||||||||
Medida A-B-C (mm) | esp (mm) | kg/m | Medida A-B-C (mm) | esp (mm) | kg/m | Medida A-B-C (mm) | esp (mm) | kg/m |
10x10x10 | 1,0 | 0,230 | 15x30x15 | 1,5 | 0,690 | 40x50x40 | 3,0 | 2,940 |
15x10x15 | 1,5 | 0,420 | 15x30x15 | 2,0 | 0,910 | 50x50x50 | 2,0 | 2,330 |
20x10x20 | 1,5 | 0,580 | 20x30x20 | 2,0 | 1,010 | 50x50x50 | 3,0 | 3,370 |
12x12x12 | 1,0 | 0,280 | 25x30x25 | 2,0 | 1,220 | 50x50x50 | 4,0 | 4,410 |
12x12x12 | 1,5 | 0,400 | 30x30x30 | 1,5 | 1,060 | 30x60x30 | 2,0 | 1,840 |
10x15x10 | 1,5 | 0,360 | 30x30x30 | 2,0 | 1,380 | 30x60x30 | 3,0 | 2,670 |
15x15x15 | 1,5 | 0,510 | 35x30x35 | 1,5 | 1,140 | 30x60x30 | 4,0 | 3,490 |
20x15x20 | 1,5 | 0,640 | 35x35x35 | 1,5 | 1,250 | 60x60x60 | 4,0 | 5,490 |
10x20x10 | 1,5 | 0,430 | 35x35x35 | 2,0 | 1,630 | 35x70x35 | 3,0 | 3,180 |
10x20x10 | 2,0 | 0,580 | 20x40x20 | 1,5 | 0,920 | 35x70x35 | 4,0 | 4,100 |
15x20x15 | 1,5 | 0,560 | 20x40x20 | 2,0 | 1,210 | 20x70x20 | 2,0 | 1,710 |
20x20x20 | 1,5 | 0,700 | 20x40x20 | 3,0 | 1,720 | 40x80x40 | 3,0 | 3,670 |
20x20x20 | 2,0 | 0,800 | 30x40x30 | 2,0 | 1,580 | 40x80x40 | 4,0 | 4,900 |
30x20x30 | 1,5 | 0,920 | 30x40x30 | 3,0 | 2,200 | 45x90x45 | 3,0 | 4,140 |
12x25x12 | 1,5 | 0,560 | 40x40x40 | 2,0 | 1,840 | 45x90x45 | 4,0 | 5,390 |
15x25x15 | 1,5 | 0,620 | 40x40x40 | 3,0 | 2,690 | 40x100x40 | 4,0 | 5,760 |
25x25x25 | 1,5 | 0,880 | 20x50x20 | 2,0 | 1,400 | 50x100x50 | 3,0 | 4,750 |
25x25x25 | 2,0 | 1,160 | 25x50x25 | 1,5 | 1,190 | 50x100x50 | 4,0 | 6,270 |
35x25x35 | 2,0 | 1,420 | 25x50x25 | 2,0 | 1,550 | 40x120x40 | 3,0 | 4,804 |
45x25x45 | 1,5 | 1,370 | 25x50x25 | 2,5 | 1,830 | 50x120x50 | 3,0 | 5,140 |
45x25x45 | 2,0 | 1,910 | 25x50x25 | 3,0 | 2,170 | 50x120x50 | 4,0 | 6,860 |
50x25x50 | 1,5 | 1,500 | 30x50x30 | 2,0 | 1,680 | 60x140x60 | 5,0 | 10,810 |
50x25x50 | 2,0 | 1,960 | 30x50x30 | 3,0 | 2,450 | 50x150x50 | 3,0 | 5,880 |
15x30x15 | 2,0 | 0,800 | 40x50x40 | 2,0 | 2,010 | 50x150x50 | 4,0 | 7,680 |
PERFIL LADOS IGUALES "L" | ||
Dimensión A-B mm | Esp. mm | kg/m |
15x15 | 1,5 | 0,340 |
20x20 | 1,5 | 0,470 |
20x20 | 2,0 | 0,610 |
25x25 | 1,5 | 0,590 |
25x25 | 2,0 | 0,770 |
30x30 | 1,5 | 0,700 |
30x30 | 2,0 | 0,940 |
30x30 | 3,0 | 1,280 |
35x35 | 2,0 | 1,100 |
35x35 | 3,0 | 1,450 |
40x40 | 2,0 | 1,160 |
40x40 | 3,0 | 1,610 |
50x50 | 2,0 | 1,440 |
50x50 | 3,0 | 2,100 |
60x60 | 3,0 | 2,700 |
60x60 | 4,0 | 3,500 |
TUBO ABIERTO CUADRADO | ||
Dimensión A-B-C mm | Esp. mm | kg/m |
20x20x6 | 1,5 | 0,810 |
25x25x7,5 | 1,5 | 1,040 |
30x30x10 | 1,5 | 1,230 |
30x30x10 | 2,0 | 1,270 |
40x40x12 | 2,0 | 2,180 |
50x50x17 | 3,0 | 4,160 |
65x65x25 | 4,0 | 7,020 |
Valor min (-max) | ||||||
---|---|---|---|---|---|---|
Aleación | C | Si | Mn | P | S | Al |
E190 FRIO | 0-0,1 | 0-0,35 | 0-0,7 | 0-0,025 | 0-0,025 | 0,015 |
E195 FRIO | 0-0,15 | 0-0,35 | 0-0,7 | 0-0,025 | 0-0,025 | 0,015 |
E220 FRIO | 0-0,14 | 0-0,35 | 0-0,7 | 0-0,025 | 0-0,025 | 0,015 |
E220 DECAPADO | 0-0,14 | 0-0,35 | 0-0,7 | 0-0,025 | 0-0,025 | 0,015 |
E235 DECAPADO | 0-0,17 | 0-0,35 | 0-1,2 | 0-0,025 | 0-0,025 | 0,015 |
Valor min (-max) | |||
---|---|---|---|
Aleación | Resistencia a la Tracción RM (N/mm²) | Alargamiento A% | Límite Elástico ReH (MPa) |
E190 FRIO | 270 | 26 | 270 |
E195 FRIO | 330 | 8 | - |
E220 FRIO | 310 | 23 | 220 |
E220 DECAPADO | 310 | 23 | 220 |
E235 DECAPADO | 390 | 7 | 235 |
Metal coil calculator
Magnitude to calculate
Knowing:
Specific weight/product (in gr/cm³)
The outer diameter is
--
millimeters